WiNG 7.X.X release does not support MeshConnex configuration on AP5XX and AP4XX
model access points. This feature will be supported in future releases.
To override the radio's WLAN or Mesh assignment:
Procedure
Select the WLAN Mapping / Mesh
Mapping tab.
Access Point Radio -
WLAN Mapping / Mesh Mapping Tab
Refer to the WLAN/BSS Mappings
field to set or override WLAN BSSID assignments for an existing access point
deployment.
Use the ‘<‘ or ‘>‘ buttons to assign WLANs and mesh points to the
available BSSIDs.
Administrators can assign each WLAN its own BSSID. If using a single-radio
access point, there are 8 BSSIDs available. If using a dual-radio access
point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the
802.11a/n radio. Each supported access point model can support up to 8 BSS
IDs.
Administrators can assign each WLAN its own BSSID. For dual-radio access
points, there are sixteen BSSIDs for the 802.11b/g/n radio and sixteen
BSSIDs for the 802.11a/n radio.
Click OK to save the
changes and overrides to the Radio Settings screen.
Click Reset to revert to the last saved configuration.
