accept (for the GRT)

Configure an Intermediate-System-to-Intermediate-System (IS-IS) accept policy instance to apply to all routes from all Backbone Edge Bridges (BEBs) for the Global Routing Table (GRT).

Syntax

accept backbone-route-map WORD<1-64>
accept i-sid <1-16777215>
accept i-sid <1-16777215> backbone-route-map WORD<1-64>
accept i-sid <1-16777215> enable
accept i-sid <1-16777215> route-map WORD<1-64>
accept isid-list WORD<1-32>
accept isid-list WORD<1-32> backbone-route-map WORD<1-64>
accept isid-list WORD<1-32> enable
accept isid-list WORD<1-32> route-map WORD<1-64>
accept route-map WORD<1-64>
accept route-map WORD<1-64> backbone-route-map WORD <1-64>
no accept backbone-route-map
no accept i-sid <1-16777215>
no accept i-sid <1-16777215> backbone-route-map
no accept i-sid <1-16777215> enable
no accept i-sid <1-16777215> route-map
no accept isid-list WORD<1-32>
no accept isid-list WORD<1-32> backbone-route-map
no accept isid-list WORD<1-32> enable
no accept isid-list WORD<1-32> route-map
no accept route-map

Command Parameters

backbone-route-map WORD<1-64>: Configures the backbone-route-map for DvR routes.
enable: Enables an IS-IS accept policy.
i-sid <1-16777215>: Specifies a service instance identifier (I-SID) number that represents a local or remote Layer 3 VSN for the IS-IS accept policy.
isid-list WORD <1-32>: Specifies a name for a list of I-SID numbers that represent local or remote Layer 3 VSN for the IS-IS accept policy.
route-map WORD<1-64>: Configures the IS-IS route policy by name.

Default

None

Command Mode

IS-IS Router Configuration