show isis multi-area ipv6 redistribute unicast

Displays the IS-IS Multi-area SPB IPv6 unicast redistribution configuration on the switch.

Syntax

Command Parameters

home-to-remote
Specifies the home to remote redistribution.
remote-to-home
Specifies the remote to home redistribution.
vrf WORD<1-16>
Specifies the Virtual Router Forwarding (VRF) name.
vrfids WORD<0-512>
Specifies a range of VRF IDs as text from range 0 to 512 characters in length.

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.

Command Output

The show isis multi-area ipv6 redistribute unicast command displays the following information:

Parameter

Description

DIRECTION

Indicates the direction of the redistribution policy.

ENABLE

Indicates if the redistribution policy is enabled on the switch.

RPOLICY

Indicates the route policy for IS-IS Multi-area SPBIPv6 unicast redistribution.

Example

Displaying the IS-IS Multi-area SPB IPv6 unicast redistribution on the switch:

Switch:1>show isis multi-area ipv6 redistribute unicast
======================================================================================
        ISIS Multiarea Redistribute List for ipv6 unicast - GlobalRouter
======================================================================================
DIRECTION            ENABLE     RPOLICY
--------------------------------------------------------------------------------------
home-to-remote       TRUE       Test1
remote-to-home       TRUE       Test2
9037807-01 Rev AA