auto-recover-port

Enable or disable automatic recovery on a port.

Syntax

auto-recover-port [enable]
auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [enable]
default auto-recover-port [enable]
default auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [enable]
no auto-recover-port [enable]
no auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [enable]

enable: Enables spoof detection on the port.
port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

The default is disabled.

GigabitEthernet Interface Configuration