neighbor password
Configure a BGP peer or peer group password for Transmission Control Protocol (TCP) MD5
authentication between two peers.
Syntax
-
default neighbor password
<nbr_ipaddr|peer-group-name> WORD<0-1536>
-
neighbor password
<nbr_ipaddr|peer-group-name> WORD<0-1536>
-
no neighbor password
<nbr_ipaddr|peer-group-name> WORD<0-1536>
Command Parameters
- <nbr_ipaddr|peer-group-name> WORD <0–1536>
- Specifies a password for TCP MD5
authentication between two peers. WORD <0–1536> is an alphanumeric string
length from 0 to 1536 characters.
- To disable this option, use no
operator with the command.
- To configure this option to the
default value, use default operator with the command.
Command Mode
BGP Router Configuration
