boot config choice

Change the boot source order to change the order in which the system accesses the configuration files. If you change the primary source, the system uses your configuration first, and then accesses the default locations. If the default locations do not contain a configuration or backup configuration file, the system loads the default configuration.

Syntax

boot config choice primary backup-config-file WORD<0-255>
boot config choice primary config-file WORD<0-255>
default boot config choice primary
default boot config choice primary backup-config-file

Command Parameters

{backup-config-file |config-file}: Specifies that the boot source uses either the configuration file or a backup configuration file.
WORD<0-255>: Identifies the configuration file. WORD<0-255> is the device and file name, up to 255 characters including the path, in one of the following formats: a.b.c.d:<file>, or /intflash/<file>.

Default

By default, the primary source is the internal flash.

Command Mode

Global Configuration