The remote VTEP IP address cannot be a local, broadcast, or multicast IP address.
Syntax
no vtep <1–500> ip
<A.B.C.D> [name WORD<1–64>]
vtep <1–500> ip
<A.B.C.D> [name WORD<1–64>]
Command Parameters
<1–500> ip <A.B.C.D> [name WORD<1–64>]
Specifies an index value and an IP
address that uniquely identifies this remote VTEP. Optionally, you can assign a
specific name to this tunnel. By default, the switch assigns a name in this
format: VTEP-<#ID>-<IP address>
