fa zero-touch-client

Configure FA zero touch for client.

Syntax

fa zero-touch-client standard <camera|phone|router|security-device|srvr-endpt|switch|video|virtual-switch|wap-type1|wap-type2> i-sid <1–15999999>
fa zero-touch-client standard camera i-sid <1–15999999>
fa zero-touch-client standard phone i-sid <1–15999999>
fa zero-touch-client standard router i-sid <1–15999999>
fa zero-touch-client standard security-device i-sid <1–15999999>
fa zero-touch-client standard srvr-endpt i-sid <1–15999999>
fa zero-touch-client standard switch i-sid <1–15999999>
fa zero-touch-client standard video i-sid <1–15999999>
fa zero-touch-client standard virtual-switch i-sid <1–15999999>
fa zero-touch-client standard wap-type1 i-sid <1–15999999>
fa zero-touch-client standard wap-type2 i-sid <1–15999999>
no fa zero-touch-client standard camera i-sid <1–15999999>
no fa zero-touch-client standard phone i-sid <1–15999999>
no fa zero-touch-client standard router i-sid <1–15999999>
no fa zero-touch-client standard security-device i-sid <1–15999999>
no fa zero-touch-client standard srvr-endpt i-sid <1–15999999>
no fa zero-touch-client standard switch i-sid <1–15999999>
no fa zero-touch-client standard video i-sid <1–15999999>
no fa zero-touch-client standard virtual-switch i-sid <1–15999999>
no fa zero-touch-client standard wap-type1 i-sid <1–15999999>
no fa zero-touch-client standard wap-type2 i-sid <1–15999999>

camera: Specifies the client type as IP Camera.
i-sid <1–15999999>: Specifies the Client I-SID for I-SID/VLAN binding generation.
phone: Specifies the client type as IP Phone.
router: Specifies the client type as Router.
security-device: Specifies the client type as Security Device.
srvr-endpt: Specifies the client type as Server Endpoint.
standard: Specifies the Standard (pre-defined) client type.
switch: Specifies the client type as Switch.
video: Specifies the client type as IP Video.
virtual-switch: Specifies the client type as Virtual Switch.
wap-type1: Specifies the client type as Wireless AP (Type 1).
wap-type2: Specifies the client type as Wireless AP (Type 2).

The default value is enable.

Global Configuration