Display Energy Efficient Ethernet (EEE) statistics for all ports, or for a specific port.
show energy-saver eee statistics
show energy-saver eee statistics {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
None
User EXEC
This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.
The show energy-saver eee statistics command displays the following information:
|
Output field |
Description |
|---|---|
|
PortId |
Specifies the port number. |
|
EEE Status |
Specifies whether EEE is enabled or disabled on the port. |
|
Tx LPI Events |
Specifies the number of times EEE has triggered Low Power Idle (LPI) on the transmitting side. |
|
Tx Idle Duration |
Specifies the total amount of time, in microseconds, during which the transmitting side was in Low Power Idle (LPI). |
|
Rx LPI Events |
Specifies the number of times EEE has triggered Low Power Idle (LPI) on the receiving side. |
|
Rx Idle Duration |
Specifies the total amount of time, in microseconds, during which the receiving side was in Low Power Idle (LPI). |
Switch:1>show energy-saver eee statistics
==========================================================================================
EEE Port Status
==========================================================================================
EEE Tx Tx Rx Rx
PortId Status LPI Events Idle Duration LPI Events Idle Duration
(micro seconds) (micro seconds)
------------------------------------------------------------------------------------------
1/1 enabled 847 963657920 115 965100020