ipv6 accept (IS-IS)

Configure an IPv6 Intermediate-System-to-Intermediate-System (IS-IS) accept policy instance to apply to all IPv6 routes from all Backbone Edge Bridges (BEBs).

Syntax

ipv6 accept i-sid <1-16777215>
ipv6 accept i-sid <1-16777215> enable
ipv6 accept i-sid <1-16777215> route-map WORD<1-64>
ipv6 accept isid-list WORD<1-32>
ipv6 accept isid-list WORD<1-32> enable
ipv6 accept isid-list WORD<1-32> route-map WORD<1-64>
ipv6 accept route-map WORD<1-64>
no ipv6 accept backbone-route-map
no ipv6 accept i-sid <1-16777215>
no ipv6 accept i-sid <1-16777215> enable
no ipv6 accept i-sid <1-16777215> route-map
no ipv6 accept isid-list WORD<1-32>
no ipv6 accept isid-list WORD<1-32> enable
no ipv6 accept isid-list WORD<1-32> route-map
no ipv6 accept route-map

Command Parameters

enable: Enables an IPv6 IS-IS accept policy.
i-sid <1-16777215>: Specifies a service instance identifier (I-SID) number that represents a local or remote IPv6 Layer 3 VSN for the IPv6 IS-IS accept policy.
isid-list WORD <1-32>: Specifies a name for a list of I-SID numbers that represent local or remote IPv6 Layer 3 VSN for the IPv6 IS-IS accept policy.
route-map WORD<1-64>: Configures the IPv6 IS-IS route policy by name.

Default

None

Command Mode

IS-IS Router Configuration