eapol re-authentication

Syntax

• default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication

• default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication enable

• default eapol re-authentication

• default eapol re-authentication enable

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication enable

• eapol re-authentication

• eapol re-authentication enable

• no eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication

• no eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} re-authentication enable

• no eapol re-authentication

• no eapol re-authentication enable

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

enable

Enables reauthenticating an existing supplicant at a specified time interval. The default is disabled.

Default

None

Command Mode

GigabitEthernet Interface Configuration