eapol init
Initialize Extensible Authentication Protocol (EAPoL) administration traffic control
direction.
Command Parameters
- {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- re-authenticate {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Starts re-authentication
immediately. {slot/port[/sub-port][-slot/port[/sub-port]][,...]} identifies the
slot and port in one of the following formats: a single slot and port (slot/port),
a range of slots and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
