ip ospf enable (for a port)

Syntax

• default ip ospf

• default ip ospf enable

• default ip ospf port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• ip ospf enable

• ip ospf port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• no ip ospf

• no ip ospf enable

• no ip ospf port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

The default is disabled.

Command Mode

GigabitEthernet Interface Configuration