clear eapol eap

Syntax

• clear eapol eap {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• clear eapol eap {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 0x00:0x00:0x00:0x00:0x00:0x00

• clear eapol eap 0x00:0x00:0x00:0x00:0x00:0x00

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Specifies the port list on which the EAP MAC is learned.

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

0x00:0x00:0x00:0x00:0x00:0x00

Specifies the MAC address for the EAP session.

Default

None.

Command Mode

Privileged EXEC