link-state group

Configures the Link-state tracking (LST) group.

Syntax

default link-state group <1-48> enable
link-state group <1-48> downstream interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
link-state group <1-48> downstream mlt <1-512>
link-state group <1-48> enable
link-state group <1-48> upstream interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
link-state group <1-48> upstream mlt <1-512>
no link-state group <1-48> enable

<1-48>: Specifies the link-state group ID.
downstream: Specifies a downstream interface for the LST group.
enable: Enables the command.
interface gigabitEthernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Specifies the slot and port for the upstream or downstream LST group.
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
mlt <1-512>: Specifies an MLT ID for the upstream or downstream LST group.
upstream: Specifies an upstream interface for the LST group.

None

Global Configuration