show khi cpp port-statistics
Displays key health information about the type of packets and protocols received on a port.
This command helps debug high CPU utilization issues.
Syntax
-
show khi cpp
port-statistics [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
-
show khi cpp
port-statistics spbm-internal-ports [<rx | tx>]
Command Parameters
- spbm-internal-ports [<rx | tx>]
- Displays port statistics for SPBM internal ports. You can filter by either
receiving or transmitting port.
- {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
