Display summarized information about Border Gateway Protocol (BGP).
show ip bgp summary [vrf WORD<1-16>] [vrfids WORD<0-512>]
None
User EXEC
The show ip bgp summary command displays the following information:
|
Output field |
Description |
|---|---|
|
BGP version |
Specifies the version of BGP that runs on the router. |
|
local-as |
Specifies the local autonomous system number. |
|
Identifier |
Specifies the BGP identifier. |
|
Decision state |
Specifies the BGP process state. |
|
NEIGHBOR |
Specifies the IP address of the remote peer. |
|
RMTAS |
Specifies the AS number of the remote peer. |
|
STATE |
Specifies the peer operating state: Idle, Accept, Connect, Open, Open-sent, and Established. |
|
HLDTM |
Specifies the negotiated hold time timer. |
|
KPALV |
Specifies the keep alive timer. |
|
HLDCFG |
Specifies the configured hold time timer. |
|
KPCFG |
Specifies the configured keep alive timer. |
|
WGHT |
Specifies the weight value assigned to the peer. |
|
CONRTY |
Specifies the retry timer. |
|
ADVINT |
Specifies the advertisement interval. |
|
UPTime |
Specifies how long (in seconds) this peer has been in the established state, or how long since this peer was last in the established state. It is set to zero when a new peer is configured or when the router is booted. If the peer never reaches the established state, the value remains zero. |