show ipv6 mld group group WORD<0-255> detail

Displays MLDv2 specific data

Syntax

show ipv6 mld group group WORD<0-255> detail port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} Ports list {slot/port [-slot/port]}
show ipv6 mld group group WORD<0-255> detail vlan <1-4059>

Command Parameters

vlan <1-4059>: Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

Default

None

Command Mode

User EXEC

Example

The following example displays detailed MLD group information.

Switch:1#show ipv6 mld group group ff1e:0000:0000:0000:0000:0000:0002:4444 detail

================================================================================
                        Mld Group Detail - GlobalRouter
================================================================================
 
Interface:                     Vlan666-1/4
MLDv2 Group:                   ff1e:0000:0000:0000:0000:0000:0002:4444
Interface Group Mode:          EXCLUDE
Interface Compatibility Mode:  MLD_V2
Interface Group Timer:         258
V1 Host Timer:                 Not Running
Interface Group Include Source List:
        Source Address                                Expires
        2001:0db8:3c4d:0015:0000:0000:1a2f:1aaa       258
Interface Group Exclude Source List :
        Source Address  												 Expires
        2001:0db8:3c4d:0015:0000:0000:1a2f:1bbb       N/A