Display Fabric Attach configuration on all interfaces.
show fa interface
None
User EXEC
The show fa interface command displays the following information:
|
Output field |
Description |
|---|---|
|
INTERFACE |
Specifies the interface (port or MLT) on which Fabric Attach is configured. |
|
SERVER STATUS |
Specifies the current state of the Fabric Attach port. It is either enabled or disabled. |
|
MGMT ISID |
Specifies the Fabric Attach management I-SID for the associated port. A zero value indicates that the management I-SID is not specified for the interface. |
|
MGMT CVID |
Specifies the Fabric Attach management customer VLAN ID (C-VID) for the interface. A zero value indicates that no C-VID is specified for the interface. |
|
MSG AUTH STATUS |
Specifies the Fabric Attach message authentication status on the port. |
|
MSG AUTH KEY |
Specifies the Fabric Attach message authentication key for the associated port. |
|
TCN |
Specifies whether Fabric Attach Ring Topology Change Notification (TCN) processing is enabled or disabled on the port or MLT. The default is disabled. |
|
ORIGIN |
Specifies the origin of the Fabric Attach port, either manually configured through CLI or EDM or dynamically configured through Auto-sense. |
The following example displays the Fabric Attach configuration on all interfaces.
Switch:1>show fa interface
========================================================================
Fabric Attach Interfaces
========================================================================
INTERFACE SERVER MGMT MGMT MSG AUTH MSG AUTH TCN ORIGIN
STATUS ISID CVID STATUS KEY
------------------------------------------------------------------------
Port 1/1 enabled 0 0 enabled ****
Port1/10 enabled 0 0 enabled ****
Port1/6 enabled 0 0 enabled ****
Port1/11 enabled 0 0 enabled ****
Mlt2 enabled 0 0 enabled ****
------------------------------------------------------------------------
5 out of 5 Total Num of fabric attach interfaces displayed
------------------------------------------------------------------------