show ip dhcp-snooping binding interface

Displays DHCP Snooping binding table information based on interface type.

Syntax

show ip dhcp-snooping binding interface
show ip dhcp-snooping binding interface gigabitEthernet
show ip dhcp-snooping binding interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show ip dhcp-snooping binding interface vlan <1-4059>
show ip dhcp-snooping binding interface vrf vrfids WORD<0-512>
show ip dhcp-snooping binding interface vrf WORD<1-16>

gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}: Displays DHCP Snooping binding table information for the specified port number.
vlan <1-4059>: Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
vrf WORD<1-16>: Displays DHCP Snooping binding table information for the specified VRF name.
vrfids WORD<0-512>: Displays DHCP Snooping binding table information for the specified VRF ID.

None

User EXEC