speed

Configure the speed of the port on the Ethernet modules.

Note

Not all parameters appear on all hardware platforms.

Syntax

default speed [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
speed [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] <10 | 100 | 1000 | 10000 | 2500 | 25000 | 5000>

<10|100|1000|10000|2500|25000|5000>: Specifies the port speed.
{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

None

GigabitEthernet Interface Configuration

You cannot use this command on VIMs that support the sys vim-speed or sys vim-speed groupcommands.