show ip igmp mrdisc neighbors

Display information about the Internet Group Management Protocol (IGMP) multicast router discovery neighbors. If you do not specify a VRF name or range of VRF IDs, the results show information for the Global Router. If you do specify a VRF name or range of VRF IDs, the results show information only for the VRFs you specify.

Syntax

show ip igmp mrdisc neighbors
show ip igmp mrdisc neighbors vrf WORD<1-16>
show ip igmp mrdisc neighbors vrfids WORD<0-512>

Command Parameters

vrf WORD<1-16>: Specifies a VRF by name.
vrfids <0-512>: Specifies a VRF by ID.

Default

None

Command Mode

Privileged EXEC

Command Output

The show ip igmp mrdisc neighbors command displays the following information:


Output field	Description
VLAN ID	Indicates the VLAN ID.
SRC_PORT	Indicates the source port.
IP Addr	Indicates the IP address.
Advert-int	Indicates the advertisement interval in seconds.
QUERY-int	Indicates the query interval in seconds.
Robust-val	Indicates the tuning for the expected packet loss on a subnet. If you expect packet loss on a subnet, increase the robustness variable.