ip igmp static-group

Syntax

• default ip igmp static-group {A.B.C.D}

• default ip igmp static-group {A.B.C.D} {A.B.C.D}

• default ip igmp static-group {A.B.C.D} {A.B.C.D} {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• default ip igmp static-group {A.B.C.D} {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• ip igmp static-group {A.B.C.D} {A.B.C.D} {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• ip igmp static-group {A.B.C.D} {A.B.C.D} port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• ip igmp static-group {A.B.C.D} {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• ip igmp static-group {A.B.C.D} port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

• no ip igmp static-group {A.B.C.D}

• no ip igmp static-group {A.B.C.D} {A.B.C.D}

• no ip igmp static-group {A.B.C.D} {A.B.C.D} {slot/port[/sub-port][-slot/port[/sub-port]][,...]} { static | blocked }

Command Parameters

[static|blocked]

Adds a static-member entry to the Internet Group Management Protocol (IGMP) interface. value is the port or list of ports to which you want to redirect the multicast stream for this multicast group. static|blocked configures the route to static or blocked.

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

<A.B.C.D> <A.B.C.D>

Indicates the IP address range from <A.B.C.D> to <A.B.C.D> of the selected multicast group.

Default

None

Command Mode

VLAN Interface Configuration