show app-telemetry counter

Displays the Application Telemetry status counters.

Syntax

show app-telemetry counter
show app-telemetry counter id <number>
show app-telemetry counter name <rule>

Command Parameters

id <1-2000>: Specifies the rule ID number.
id <1-2000>: Shows the counters for the specified rule number.
name WORD<1-32>: Specifies the name of the rule.
name WORD<1-32>: Shows the counters for the specified rule name.

Default

None

Command Mode

User EXEC

Command Output

The show app-telemetry counter command displays the following information:


Output field	Description
EntryId	Displays the Application Telemetry rule ID.
Name	Displays the rule name.
Packets	Displays the number of packets transmitted to the Analytics Engine that matched the specified pattern in the rule.
Bytes	Displays the total number of bytes in the packets.

Example

The following example displays the Application Telemetry counters.

Switch:1>show app—telemetry counter

=================================================================
              Application Telemetry Counters
=================================================================
EntryId        Name		Packets		Bytes
-----------------------------------------------------------------
1  	      ssh		 1258		   72145
2  	      sslclient	  457		    27000
-----------------------------------------------------------------

All 2 out of 2 Total Num of Application Telemetry counters entries displayed