Displays IP multicast over Fabric Connect summary information.
show isis spb-mcast-summary
show isis spb-mcast-summary count
show isis spb-mcast-summary host-name WORD<0-255>
show isis spb-mcast-summary lspid <xxxx.xxxx.xxxx.xx-xx>
None
User EXEC
The show isis spb-mcast-summary command displays the following information:
|
Output field |
Description |
|---|---|
|
SCOPE I-SID |
Indicates the I-SID that specifies the multicast streams when the scope is either the Layer 3 VSN or the Layer 2 VSN or any combination. |
|
SOURCE ADDRESS |
Indicates the IP multicast source address that maps to the I-SID. |
|
GROUP ADDRESS |
Indicates the IP multicast group address that maps to the I-SID. |
|
DATA I-SID |
Specifies the data I-SID for the IP Multicast over Fabric Connect route. After a BEB receives the IP Multicast over Fabric Connect data from a sender, the BEB allocates a data I-SID in the range of 16,000,000 to 16,512,000 for the stream. The stream is identified by the source IP address, group IP address, and the local VLAN the stream is received on. The data I-SID is a child of the scope or VSN I-SID. |
|
BVID |
Indicates the ID of the SPBM backbone VLAN (B-VLAN) on which the multicast stream forwards in the SPBM cloud. |
|
LSP FRAG |
Indicates the fragment number of the LSP ID. |
|
HOST-NAME |
Specifies the host name listed in the LSP, or the system name if the host is not configured. |