snmp-server user WORD<1-32> sha

Create a user on a remote system with sha.

Syntax

snmp-server user WORD<1-32> sha
snmp-server user WORD<1-32> sha [aes]
snmp-server user WORD<1-32> sha [aes] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [aes] [read-view WORD<0-32>]
snmp-server user WORD<1-32> sha [aes] [read-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [aes] [read-view WORD<0-32>] [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [aes] [read-view WORD<0-32>] [write-view WORD<0-32>] [notify-view]
snmp-server user WORD<1-32> sha [aes] [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [aes] [write-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des]
snmp-server user WORD<1-32> sha [des] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [read-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [read-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [read-view WORD<0-32>] [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [read-view WORD<0-32>] [write-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [des] [write-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [read-view WORD<0-32>]
snmp-server user WORD<1-32> sha [read-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [read-view WORD<0-32>] [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [read-view WORD<0-32>] [write-view WORD<0-32>] [notify-view WORD<0-32>]
snmp-server user WORD<1-32> sha [write-view WORD<0-32>]
snmp-server user WORD<1-32> sha [write-view WORD<0-32>] [notify-view]

Command Parameters

sha: Specifies an authentication protocol. If no value is entered, no authentication capability exists.
aes: Specifies a privacy protocol. If no value is entered, no authentication capability exists.
des: Specifies a privacy protocol. If no value is entered, no authentication capability exists.
notify-view WORD<0-32>: Specifies the view name. The first instance is a noAuth view. The second instance is an auth view and the last instance is an authPriv view.
read-view WORD<0-32>: Specifies the view name. The first instance is a noAuth view. The second instance is an auth view and the last instance is an authPriv view.
write-view WORD<0-32>: Specifies the view name. The first instance is a noAuth view. The second instance is an auth view and the last instance is an authPriv view.

Default

None

Command Mode

Global Configuration