show isis

AdminState

Indicates the administrative state of the router.

RouterType

Indicates the router Level: l1, l2, or l1/2.

System ID

Indicates the system ID.

Max LSP Gen Interval

Indicates the maximum time between LSP updates in seconds.

Metric

Indicates if the metric is narrow or wide.

Overload-on-startup

Indicates the IS-IS overload-on-startup value in seconds. The overload-onstartup value is used as a timer to control when to send out Link State Packets (LSPs) with the overload bit cleared after IS-IS startup. The default value is 20 seconds.

Overload

Indicates if there is an overload condition.

Csnp Interval

Indicates the interval between CSNP updates in seconds.

PSNP Interval

Indicates the interval between PSNP updates in seconds.

Rxmt LSP Interval

Indicates the received LSP time interval.

spf-delay

Indicates an SPF delay in milliseconds. The default value is 100 milliseconds.

Router Name

Indicates the IS-IS name of the router.

ip source-address

Indicates the IP source address used for SPBM IP shortcuts.

ipv6 source-address

Indicates the IPv6 source address used for SPBM IP shortcuts.

ip tunnel source-address

Indicates the IP tunnel source address used for SPBM Fabric Extend.

Tunnel vrf

Indicates the name of the vrf that contains the tunnel endpoints.

ip tunnel mtu

Indicates the maximum size of a packet that can be transmitted through the IP tunnel.

Num of Interfaces

Indicates the number of interfaces on the router.

Num of Area Addresses

Indicates the number of area addresses on the router.

Num of Summary Address

Indicates the summary of the addresses on router.

inband-mgmt-ip

Indicates the DvR management IP address for this node, in the DvR domain.

backbone

Indicates whether this node is part of the DvR backbone.

Dynamically Learned Area

For Fabric Area Network (FAN) members, specifies the IS-IS area that is dynamically learned from the neighbor‘s Hello PDU if the node does not have the IS-IS manual area configured.

FAN Member

Indicates whether the node is a member of the FAN.

Hello Padding

Indicates IS-IS hello packets are padded to detect mismatched MTUs on adjacencies.

Multi-area OperState

Indicates the Multi-area SPB operational state as:

• Disabled—Multi-area SPB is disabled on the switch.

• Init—the switch is initializing to function as a boundary node.

• Designated—the switch is operating as a designated boundary node.

• Non-designated—the switch is operating as a non-designated boundary node.

Multi-Area Flags

home-always-up — Indicates that the boundary node forwards traffic from the UNIs to the remote-area and from the remote-area to the UNIs without requiring an established adjacency in the home area.