ipv6 area range

Create and configure an area address range on the OSPF router to reduce the number of ABR advertisements into other OSPF areas.

Syntax

Command Parameters

{A.B.C.D}
Specifies the area address.
advertise-metric <0-65535>
Specifies the advertise metric value and LSA type. The default advertise-metric is 0.
advertise-mode <advertise|not-advertise>
Configures if the area advertises into other OSPF areas. The default avertise-mode is advertise.
inter-area-prefix-link
Configures the area to use this LSA type.
nssa-extlink
Configures the area to use this LSA type.
WORD<0-255>
Specifies the IPv6 address and prefix.

Default

None

Command Mode

OSPF Router Configuration

9037807-01 Rev AA