l2 tracemroute

Syntax

• l2 tracemroute source {A.B.C.D} group {A.B.C.D}

• l2 tracemroute source {A.B.C.D} group {A.B.C.D} priority <0-7>

• l2 tracemroute source {A.B.C.D} group {A.B.C.D} ttl-value <1-255>

• l2 tracemroute source {A.B.C.D} group {A.B.C.D} vlan <1-4059>

• l2 tracemroute source {A.B.C.D} group {A.B.C.D} vrf WORD<1-16>

Command Parameters

group {A.B.C.D}

Specifies the multicast group address.

priority <0-7>

Specifies the priority. The default is 7.

source {A.B.C.D}

Specifies the source address.

ttl-value <1-255>

Specifies the time-to-live value for the trace.

vlan <1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

vrf WORD<1-16>

Specifies the VRF name.

Default

None

Command Mode

User EXEC

Command Output

The l2 tracemroute command displays the following information for a VLAN:

The l2 tracemroute command displays the following information for a VRF: