auto-sense isis hello-auth type none

Configures the authentication type as none, for IS-IS hello packets on ports that are operating in Auto-sense mode.

Syntax

auto-sense isis hello-auth type none
auto-sense isis hello-auth type none [key WORD<1-16>]
auto-sense isis hello-auth type none key WORD<1-16> [key-id <1-255>]
no auto-sense isis hello-auth

Command Parameters

key WORD<1-16>: Specifies the authentication key (password) that the receiving router uses to verify the packet.
key-id <1-255>: Specifies the key ID.

Default

None.

Command Mode

Global Configuration

9037807-01 Rev AA