ipv6 isis redistribute direct
Identify IPv6 routes on the local switch to be announced into the Shortest Path Bridging
MAC (SPBM) network.
Syntax
-
default ipv6 isis
redistribute direct enable
-
default ipv6 isis
redistribute direct metric
-
default ipv6 isis
redistribute direct metric-type
-
default ipv6 isis
redistribute direct route-map
-
ipv6 isis redistribute
direct
-
ipv6 isis redistribute
direct enable
-
ipv6 isis redistribute
direct metric <0-65535>
-
ipv6 isis redistribute
direct metric-type external
-
ipv6 isis redistribute
direct metric-type internal
-
ipv6 isis redistribute
direct route-map WORD<0-64>
-
no ipv6 isis redistribute
direct
-
no ipv6 isis redistribute
direct enable
-
no ipv6 isis redistribute
direct metric
-
no ipv6 isis redistribute
direct metric-type
-
no ipv6 isis redistribute
direct route-map
Command Parameters
- enable
- Enables direct route
redistribution.
- metric <0-65535>
- Specifies the metric for the
redistributed route.Use a value that is consistent with the destination protocol.
The default is 1.
- metrictype external
- Specifies the metric type.
Specifies a type 1 or a type 2 metric. For metric type 1, the cost of the external
routes is equal to the sum of all internal costs and the external cost. For metric
type 2, the cost of the external routes is equal to the external cost alone. The
default is internal.
- metrictype internal
- Specifies the metric type.
Specifies a type 1 or a type 2 metric. For metric type 1, the cost of the external
routes is equal to the sum of all internal costs and the external cost. For metric
type 2, the cost of the external routes is equal to the external cost alone. The
default is internal.
Default
By default, redistribution is disabled.
Command Mode
VRF Router Configuration