auto-negotiation-advertisements

Configure Auto-Negotiation advertisements after you enable Auto-Negotiation.

Note

Because of port speed differences, not all parameters appear on all hardware platforms.

Syntax

auto-negotiation-advertisements 10-full
auto-negotiation-advertisements 10-half
auto-negotiation-advertisements 100-full
auto-negotiation-advertisements 100-half
auto-negotiation-advertisements 1000-full
auto-negotiation-advertisements 10000-full
auto-negotiation-advertisements 2500-full
auto-negotiation-advertisements 25000-full
auto-negotiation-advertisements 5000-full
auto-negotiation-advertisements none
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 10-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 10-half
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 100-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 100-half
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 1000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 10000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 2500-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 25000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 5000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} none
default auto-negotiation-advertisements
default auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
no auto-negotiation-advertisements
no auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

10-full: Advertises 10 Mbps full-duplex.
10-half: Advertises 10 Mbps half-duplex.
100-full: Advertises 100 Mbps full-duplex.
100-half: Advertises 100 Mbps half-duplex.
1000-full: Advertises 1 Gbps full-duplex.
10000-full: Advertises 10 Gbps full-duplex.
2500-full: Advertises 2.5 Gbps full-duplex.
25000-full: Advertises 25 Gbps full-duplex.
5000-full: Advertises 5 Gbps full-duplex.
none: Configures the value to none.
port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration