show ipv6 mld snoop-trace

Displays MLD snooping tracing information

Syntax

show ipv6 mld snoop-trace

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 mld snoop-trace command displays the following information:


Output field	Description
GROUP ADDRESS	Specifies the IP multicast address of the group traversing the router
SOURCE ADDRESS	Specifies the IP source address of the multicast group address.
IN VLAN	Specfies the ingress VLAN ID for the multicast source.
IN PORT	Specifies the ingress port for the multicast group.
OUT VLAN	Specifies the egress VLAN ID for the multicast group.
OUT PORT	Specifies the egress port of the multicast group.
TYPE	Specifies the port type on which the snoop entry is learnt.

Example

The following example displays MLD snooping tracing information.

Switch:1#show ipv6 mld snoop-trace
============================================================
              Mld Snoop Trace - GlobalRouter 

============================================================
GROUP/ 
SOURCE                 IN     IN   OUT    OUT      TYPE 
ADDRESS                VLAN   PORT VLAN   PORT 
------------------------------------------------------------
ff10:0:0:0:0:0:0:1/    10     1/15 10     1/16     ACCESS 
5051:0:0:0:0:1:84:51