ip dhcp-relay fwd-path {A.B.C.D}
src-port-67 (for a VLAN)
Configure a forwarding path with source port 67 in a User Datagram Protocol (UDP) on a
VLAN.
Syntax
-
default ip dhcp-relay
fwd-path {A.B.C.D} src-port-67
-
ip dhcp-relay
fwd-path {A.B.C.D} src-port-67
-
no ip dhcp-relay fwd-path {A.B.C.D} src-port-67
Command Parameters
- {A.B.C.D}
- Creates a forwarding path to
the DHCP server with a mode and a state. A.B.C.D is the IP address of the
server. The default IP address of the relay is the address of the interface.
Tip
If the relay is a Virtual Router configured on this interface, you
must set the vrid.
- src-port-67
- Specifies that the UDP source
port is 67 for BOOTP request. The default is 68.
Command Mode
VLAN Interface Configuration
