netbios-node-type

Specifies the node type of the NetBIOS name server for this DHCP subnet.

Syntax

Command Parameters

<0x1|0x2|0x4|0x8>
Specifies the node type of the NetBIOS name server. The following list provides definitions of the allowed values:
  • 0x1—B node

  • 0x2—P node

  • 0x4—M node

  • 0x8—H node

Default

The default is 0x0 (unconfigured).

Command Mode

DHCP Server Subnet Configuration

Usage Guidelines

For information about precedence rules between scopes, see Fabric Engine User Guide.