show interfaces gigabitethernet statistics dhcp-relay

Syntax

• show interfaces gigabitEthernet statistics dhcp-relay

• show interfaces gigabitEthernet statistics dhcp-relay {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• show interfaces gigabitEthernet statistics dhcp-relay vrf WORD<1-16>

• show interfaces gigabitEthernet statistics dhcp-relay vrfids WORD<0-512>

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

vrf WORD<1-16>

Displays all statistics by port.

vrfids WORD<0-512>

Specifies the slot and the port number.

Default

None

Command Mode

Privileged EXEC

Command Output

The show interfaces gigabitethernet statistics dhcp-relay command displays the following information: