Displays information about the active rendezvous point (RP) for all groups or a specific group.
show ip pim active-rp
show ip pim active-rp group <A.B.C.D>
None
User EXEC
The show ip pim active-rp command displays the following information:
|
Output field |
Description |
|---|---|
|
GRPADDR |
Shows the IP address of the multicast group. |
|
RP-ADDR |
Shows the IP address of the RP router. This address must be one of the local PIM-SM enabled interfaces. |
|
RP-PRIORITY |
Shows the priority of the RP. |
The following example displays information about the active rendezvous point (RP) for all groups or a specific group. If you do not specify an IP address, you receive information about the active RP for all the running multicast groups on the switch.
Switch:1>show ip pim active-rp
================================================================================
Pim Grp->RP Active RP Table - GlobalRouter
================================================================================
GRPADDR RP-ADDR RP-PRIORITY
--------------------------------------------------------------------------------
239.0.0.1 20.0.0.90 0
239.0.0.2 20.0.0.90 0
239.0.0.3 20.0.0.90 0
239.0.0.4 20.0.0.90 0
239.0.0.5 20.0.0.90 0
239.255.255.250 20.0.0.90 0