show isis multi-area ipv6 redistribute vrfids

Displays the IS-IS Multi-area SPB IPv6 redistribution configuration for a specific Virtual Router Forwarding (VRF) ID.

Syntax

show isis multi-area ipv6 redistribute vrfids WORD<0-512>

Command Parameters

WORD<0-512>: Specifies the VRF ID.

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.

Command Output

The show isis multi-area ipv6 redistribute vrfids WORD<0-512> command displays the following information:


Parameter	Description
DIRECTION	Indicates the direction of the redistribution policy.
ENABLE	Indicates if the redistribution policy is enabled on the switch.
RPOLICY	Indicates the route policy for IS-IS Multi-area SPB IPv6 redistribution for a specific VRF ID.

Example

Displaying the IS-IS Multi-area SPB IPv6 redistribution configuration for the VRF ID:

Switch:1>show isis multi-area ipv6 redistribute vrfids 2
======================================================================================
       MULTI-AREA IP REDISTRIBUTE IPv6 UNICAST - VRF multicast
======================================================================================
DIRECTION            ENABLE     RPOLICY
--------------------------------------------------------------------------------------
home-to-remote       TRUE       Test