Displays the IPv6 mroute route information
show ipv6 mroute route
None
User EXEC
The show ipv6 mroute route command displays the following information:
Output field |
Description |
---|---|
GROUP |
Displays the IPv6 multicast group for this entry that specifies a next hop on an outgoing interface. |
SRCMASK |
Displays the network mask that, when combined with the corresponding next hop Source value, identifies the source for this entry that specifies a next hop on an outgoing interface. |
UPSTREAM_NBR |
Shows the address of the upstream neighbor from which the IPv6 datagrams from these sources are received. |
SOURCE |
Displays the network address that, when combined with the corresponding next hop SourceMask value, identifies the source for this entry that specifies a next hop on an outgoing interface. |
IF |
Displays the slot and port number or VLAN ID for this entry. |
EXPIR |
Displays the minimum amount of time that remains before this entry ages out. The value 0 indicates that the entry is not subject to aging. |
PROT |
Displays the protocol as one of the following:
|
The following example displays the IPv6 mroute route information.
Switch:1>show ipv6 mroute route ======================================================================================================= Mroute Route - GlobalRouter ======================================================================================================= GROUP SOURCE SRCMASK UPSTREAM_NBR IF EXPIR PROT ------------------------------------------------------------------------------------------------------- ff30:0:0:0:0:0:0:1 5010:0:0:0:0:1:82:10 64 0:0:0:0:0:0:0:0 VLAN 10 202 pimsm ff30:0:0:0:0:0:0:1 5010:0:0:0:0:1:82:11 64 0:0:0:0:0:0:0:0 VLAN 10 175 pimsm 2 out of 2 total mroute entries displayed