show spanning-tree bpduguard
Display BPDU Guard configuration
Syntax
-
show spanning-tree
bpduguard [{slot/port[/sub-port] [-slot/port[/subport]][,...]}]
-
show spanning-tree
bpduguard [GigabitEthernet {slot/port[/sub-port] [-slot/port[/subport]][,...]}]
Command Parameters
- {slot/port[/sub-port] [-slot/port[/subport]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
