ip rip redistribute { direct | isis | ospf | rip | static }

Configure and enable redistribution entries to allow a protocol to announce routes of a certain source type, for example, static, RIP, or direct.

Syntax

default ip rip redistribute { direct | isis | ospf | rip | static }
default ip rip redistribute { direct | isis | ospf | rip | static } enable
default ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } metric
default ip rip redistribute { direct | isis | ospf | rip | static } metric vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } route-map
default ip rip redistribute { direct | isis | ospf | rip | static } route-map vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static }
ip rip redistribute { direct | isis | ospf | rip | static } enable
ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } metric <0-65535>
ip rip redistribute { direct | isis | ospf | rip | static } metric <0-65535> vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } route-map WORD<0-64>
ip rip redistribute { direct | isis | ospf | rip | static } route-map WORD<0-64> vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static }
no ip rip redistribute { direct | isis | ospf | rip | static } enable
no ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static } route-map
no ip rip redistribute { direct | isis | ospf | rip | static } route-map vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>

Command Parameters

{ direct | isis | ospf | rip | static }

Specifies the type of routes to redistribute-the protocol source.

If you use the direct parameter, configured secondary IP subnets are always redistributed unless you configure a filtering route-map with redistribution.

enable

Enables the route redistribution instance.

metric <0-65535>

Configures the metric to apply to redistributed routes.

route-map WORD<0-64>

Configures the route map to apply to redistributed routes.

vrf WORD <1-16>

Specifies the VRF instance.

vrf-src WORD<1-16>

Specifies the source VRF instance. This parameter is not required for redistribution within the same VRF.

Default

None

Command Mode

VRF Router Configuration