Verify that the image and configuration are loaded properly.
show sys software
None
User EXEC
The show sys software command displays the following information:
|
Output field |
Description |
|---|---|
|
Default Runtime Config File |
Displays the default Run-time configuration file directory name. |
|
Config File |
Displays the name of a new configuration file. |
|
Last Runtime Config Save |
Displays the last run-time configuration saved. |
|
Version |
Displays the software version information. |
|
PrimaryConfigSource |
Displays the primary boot configuration file. |
|
SecondaryConfigSource |
Displays the secondary boot configuration file. |
|
EnableFactoryDefaults |
Displays if the switch will bypass the loading of the switch configuration file and load the factory defaults. |
|
EnableDebugMode |
Displays if the switch debugs the configuration file during loading configuration at system boot. |
|
EnableRebootOnError |
Displays if the switch automatically reboots on a fatal error. |
|
EnableTelnetServer |
Displays if the Telnet server is enabled. |
|
EnableFtpServer |
Displays if the FTP server is enabled. |
|
EnableTftpServer |
Displays if the TFTP server is enabled. |
The following example displays output from the show sys software command.
Switch:1#show sys software System Software Info : Default Runtime Config File : /intflash/config.cfg Config File : Last Runtime Config Save : 0 Boot Config Table Version : Build 9.0.0.0 (GA) on Mon Oct 30 18:04:13 EDT 2023 PrimaryConfigSource : /intflash/config.cfg SecondaryConfigSource : /intflash/config.cfg EnableFactoryDefaults : false EnableDebugMode : false EnableRebootOnError : true EnableTelnetServer : true EnableFtpServer : true EnableTftpServer : false