show lacp

View Link Aggregation Control Protocol (LACP) configuration information to determine the LACP parameters and to ensure your configuration is correct.

Syntax

show lacp
show lacp
show lacp actor-admin interface
show lacp actor-admin interface gigabitethernet
show lacp actor-admin interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show lacp actor-admin interface gigabitethernet vid <1-4059>
show lacp actor-oper interface
show lacp actor-oper interface gigabitethernet
show lacp actor-oper interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show lacp actor-oper interface gigabitethernet vid <1-4059>
show lacp extension interface
show lacp extension interface gigabitethernet
show lacp extension interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show lacp extension interface gigabitethernet vid <1-4059>
show lacp partner-admin interface
show lacp partner-admin interface gigabitethernet
show lacp partner-admin interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show lacp partner-admin interface gigabitethernet vid <1-4059>
show lacp partner-oper interface
show lacp partner-oper interface gigabitethernet
show lacp partner-oper interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show lacp partner-oper interface gigabitethernet vid <1-4059>

actor-admin: Shows LACP actor administrative information for all interfaces.
actor-oper: Shows all LACP actor operational information for all interfaces.
extension: Show all LACP timer information.
interface: Shows all LACP port configuration information for all interfaces.
interface mlt <64-6399>: Shows the MLT LACP information for all MLTs or the specific MLT index.
interface mlt id <1-512>: Specifies the MLT ID.
partner-admin: Shows all LACP partner adminstrative information.
partner-oper: Shows all LACP partner operational information.
vid <1-4059>: Specifies the VLAN ID in the range of 2 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

None

User EXEC