ipv6 ospf area range (for a VRF)

Configure OSPF parameters on a VRF to control how OSPF behaves.

Syntax

default ipv6 ospf area range {A.B.C.D} WORD<0-255> inter-area-prefix-link [advertise-metric]
default ipv6 ospf area range {A.B.C.D} WORD<0-255> nssa-extlink [advertise-metric]
ipv6 ospf area range {A.B.C.D} WORD<0-255> advertise-mode advertise
ipv6 ospf area range {A.B.C.D} WORD<0-255> advertise-mode not-advertise
ipv6 ospf area range {A.B.C.D} WORD<0-255> inter-area-prefix-link advertise-metric <0-65535>
ipv6 ospf area range {A.B.C.D} WORD<0-255> inter-area-prefix-link advertise-mode advertise
ipv6 ospf area range {A.B.C.D} WORD<0-255> inter-area-prefix-link advertise-mode not-advertise
ipv6 ospf area range {A.B.C.D} WORD<0-255> nssa-extlink advertise-metric <0-65535>
ipv6 ospf area range {A.B.C.D} WORD<0-255> nssa-extlink advertise-mode advertise
ipv6 ospf area range {A.B.C.D} WORD<0-255> nssa-extlink advertise-mode not-advertise
no ipv6 ospf area range {A.B.C.D} WORD<0-255> inter-area-prefix-link
no ipv6 ospf area range {A.B.C.D} WORD<0-255> nssa-extlink

{A.B.C.D}: Specifies the area address.
advertise-metric <0-65535>: Specifies the advertise metric value and LSA type. The default advertise-metric is 0.
advertise-mode <advertise|not-advertise>: Configures if the area advertises into other OSPF areas. The default avertise-mode is advertise.
inter-area-prefix-link: Configures the area to use this LSA type.
nssa-extlink: Configures the area to use this LSA type.
WORD<0-255>: Specifies the IPv6 address and prefix.

None

VRF Router Configuration