ipv6 isis redistribute static
Identify IPv6 routes on the local switch to be announced into the Shortest Path Bridging
MAC (SPBM) network.
Syntax
-
default ipv6 isis
redistribute static enable
-
default ipv6 isis
redistribute static metric
-
default ipv6 isis
redistribute static metric-type
-
default ipv6 isis
redistribute static route-map
-
ipv6 isis redistribute
static
-
ipv6 isis redistribute
static enable
-
ipv6 isis redistribute
static metric <0-65535>
-
ipv6 isis redistribute
static metric-type external
-
ipv6 isis redistribute
static metric-type internal
-
ipv6 isis redistribute
static route-map WORD<0-64>
-
no ipv6 isis redistribute
static
-
no ipv6 isis redistribute
static enable
-
no ipv6 isis redistribute
static metric
-
no ipv6 isis redistribute
static metric-type
-
no ipv6 isis redistribute
static route-map
Command Parameters
- enable
- Enables static route
redistribution.
- metric <0-65535>
- Specifies the metric for the
redistributed route.Use a value that is consistent with the destination protocol.
The default is 1.
- metrictype external
- Specifies the metric type.
Specifies a type 1 or a type 2 metric. For metric type 1, the cost of the external
routes is equal to the sum of all internal costs and the external cost. For metric
type 2, the cost of the external routes is equal to the external cost alone. The
default is internal.
- metrictype internal
- Specifies the metric type.
Specifies a type 1 or a type 2 metric. For metric type 1, the cost of the external
routes is equal to the sum of all internal costs and the external cost. For metric
type 2, the cost of the external routes is equal to the external cost alone. The
default is internal.
Default
By default, redistribution is disabled.
Command Mode
VRF Router Configuration