vlan static-mcastmac

Syntax

• default vlan static-mcastmac <1-4059> [0x00:0x00:0x00:0x00:0x00:0x00] [mlt WORD<1-256>]

• default vlan static-mcastmac <1-4059> [0x00:0x00:0x00:0x00:0x00:0x00] [mlt WORD<1-256>]

• default vlan static-mcastmac <1-4059> ports{slot/port[/sub-port][-slot/port[/sub-port]][,...]} [0x00:0x00:0x00:0x00:0x00:0x00]

• no vlan static-mcastmac <1-4059> 0x00:0x00:0x00:0x00:0x00:0x00

• no vlan static-mcastmac <1-4059> ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [0x00:0x00:0x00:0x00:0x00:0x00]

• vlan static-mcastmac <1-4059> ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [0x00:0x00:0x00:0x00:0x00:0x00]

• vlan static-mcastmac <1-4059>[0x00:0x00:0x00:0x00:0x00:0x00][{slot/port[/sub-port][-slot/port[/sub-port]][,...]}] [mlt WORD<1-256>]

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

<1-256>

Specifies the MLT ID.

<1-4059>

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

0x00:0x00:0x00:0x00:0x00:0x00

Specifies the MAC address.

Default

None

Command Mode

Global Configuration