source-mac-vlan

Syntax

• default source-mac-vlan

• default source-mac-vlan enable

• default source-mac-vlan port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• no source-mac-vlan

• no source-mac-vlan enable

• no source-mac-vlan port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• source-mac-vlan

• source-mac-vlan enable

• source-mac-vlan port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

enable

Enables or disables source MAC-based VLAN for the port.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

The default is enabled.

Command Mode

GigabitEthernet Interface Configuration