software
Perform various software functions on the switch to ensure it is updated with latest
versions.
Syntax
-
software activate
WORD<1-99>
-
software add
WORD<1-99> [-y]
-
software add-modules
WORD<1-99>
-
software commit
-
software iqagent reinstall
-
software remove
WORD<1-99>
Command Parameters
- activate WORD<1-99>
- Copies the software version to the
boot flash file. When you use the software activate command, the system checks for
hardware dependencies and prevents a downgrade if it detects a dependency. For
example, if a hardware component has a minimum software version dependency, you
cannot downgrade to an incompatible software version or install the hardware
component in a chassis that runs an incompatible software version.
- add WORD<1-99>
- Unpacks a software release
<version>.
- add-modules WORD<1-99>
- Add modules to existing software
release in /intflash/release/<version>
- commit
- Ensures the running software
release is trusted.
- iqagent reinstall
- Returns the ExtremeCloud IQ Agent
firmware version on the switch to the version bundled with the network operating
system (NOS) image currently installed on the switch.
- remove WORD<1-99>
- Removes the software release
<version>.
- -y
- Suppresses the confirmation
message to automatically overwrite the non-primary image. If you omit this
parameter, you must confirm the action to overwrite the non-primary image.
Command Mode
Privileged EXEC
Usage Guidelines
The -y parameter is
not supported on 5520 Series.
