spoof-detect

Syntax

• default spoof-detect

• default spoof-detect enable

• default spoof-detect port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• no spoof-detect

• no spoof-detect enable

• no spoof-detect port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• no spoof-detect port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• spoof-detect

• spoof-detect enable

• spoof-detect port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

enable

Enables spoof detection on the port.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

The default is disabled.

Command Mode

GigabitEthernet Interface Configuration