ip igmp (for a VRF)
Configure Internet Group Management Protocol (IGMP) for each interface to change default
multicasting operations.
Syntax
-
default ip igmp ssm-map
{A.B.C.D} {A.B.C.D}
-
default ip igmp ssm-map
{A.B.C.D} {A.B.C.D} [enable]
-
ip igmp generate-log
-
ip igmp generate-trap
-
ip igmp
immediate-leave-mode <multiple-user|one-user>
-
ip igmp ssm
[dynamic-learning] [group-range {A.B.C.D/X}]
-
ip igmp ssm-map {A.B.C.D}
{A.B.C.D} [enable]
-
ip igmp ssm-map all
-
no ip igmp ssm-map
{A.B.C.D} {A.B.C.D}
-
no ip igmp ssm-map
{A.B.C.D} {A.B.C.D} [enable]
Command Parameters
- generate-log
- Sets the Internet Group Management
Protocol (IGMP) log.
- generate-trap
- Sets the Internet Group Management
Protocol (IGMP) trap.
- immediate-leave-mode <multiple-user|one-user
- Enables immediate leave mode to
users which is either a single user or multiple users.
- ssm [dynamic-learning] [group-range {A.B.C.D/X}]
- Enables and sets the Source
Specific Multicast (SSM) features. The parameter, dynamic-learning enables SSM
dynamic learning. The parameter, group range {A.B.C.D/X} configures the range
group address and mask. The SSM range parameter extends the default SSM range of
232/8 to include an IP multicast address. You can configure existing applications
without having to change their group configurations. This parameter specifies an
IP multicast address within the range of 224.0.0.0 and 239.255.255.255. The
default is 232.0.0.0. The address mask is the IP address mask of the multicast
group. The default is 255.0.0.0.
- ssm-map all
- Enables the Source Specific
Multicast (SSM) map table for all static entries.
- ssm-map{A.B.C.D} {A.B.C.D}[enable]
- Enables the Source Specific
Multicast (SSM) map table for a specific entry or creates a static entry for a
specific group. The parameter, {A.B.C.D} {A.B.C.D} creates a static SSM channel
table entry by specifying the group and source IP addresses. The first IP address
is an IP multicast address within the SSM range. The second IP address is the
source IP address and it it is an IP host address that sends traffic to the group.
The default for {A.B.C.D}{A.B.C.D} enable is enable for each entry. The default is
enable for each entry.
- ssm-map{A.B.C.D}[enable]
- Enables the administrative state
for a specific entry (group). This variable does not affect the
dynamically-learned entries. This state determines whether the switch uses the
static entry or saves it for future use. The default is enable for each
entry.
Command Mode
VRF Router Configuration
